Gossen Metrawatt LABKON P500 handleiding
Handleiding
Je bekijkt pagina 27 van 64
LABKON Series
_________________________________________________________________________________________________
GMC-I Messtechnik GmbH 27
3.13.3 6 A Calibration
Press “Enter” key to verify and then you will see the following:
Enter the value you read from the multimeter, which is retained to four decimal places. If necessary, press the “Clear” key to
remove the wrong input value of present digit. Then press the “Enter” key to confirm.
3.13.4 9 A Calibration
Press “Enter” key to verify and then the display will show as follows:
Enter the value you read from the multimeter, which is retained to four decimal places. If necessary, press the “Clear” key to
remove the wrong input value of present digit. Then press the “Enter” key to confirm.
3.14 OV Calibration
OV calibration is a kind of automatic calibration without manual operation, which starts after the voltage calibration is
conducted and is shown in the following:
When the calibration is completed, the display will go back to the calibration menu.
Bekijk gratis de handleiding van Gossen Metrawatt LABKON P500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gossen Metrawatt |
| Model | LABKON P500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6992 MB |
