Handleiding
Je bekijkt pagina 22 van 28
EN 22
CONVERSION INSTRUCTION
3A. Screw the by-pass screws (3) of all gas taps completely in by using the flat-blade
screwdriver (T2).
3B. Remove the by-pass screws by using the flat-blade screwdriver (T2) and the nose pliers (T3).
Place the new by-pass screws with the nose pliers and screw the by-pass screws of all gas
taps in, by using the flat-blade screwdriver.
3C. Adjust the by-pass screws (3) of all gas taps by using the flat-blade screwdriver (T2) until a
stable flame is established with a minimal gas flow. Please check if the flame is stable in
cold and hot condition of the burner.
T2+T3
T2+T3
3
B1
B2
Check for gas tightness and operation
When the appliance is connected to the gas supply, use leak test spray to check the gas
tightness.
1. Seal the injector.
2. Open the gas tap.
Attention: press and open tap to override the thermo-electric safety device and
keep it pressed down.
3. Spray leak test spray over all gas connections and check for gas tightness.
4. Repeat for every burner.
Bekijk gratis de handleiding van Gorenje GKTW641SYB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GKTW641SYB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1978 MB |
