Handleiding
Je bekijkt pagina 21 van 28
EN 21
CONVERSION INSTRUCTION
Converting nozzles
Please note: disconnect the appliance from the power supply.
Prevent damage of the worktop. Lay down parts of the appliance
on a protected base.
For converting to a different type of gas, the nozzles have to be changed.
The values are also marked on the nozzle.
1. Remove pan supports, burner heads, crowns and covers (see pictures A1 and A2).
Pull off the control knobs vertically.
2. Use the socket (T1) or open end spanner (T4) to remove the old nozzles and place the new
nozzles inside the burner cups (see pictures A1 and A2).
A1
A2
1
2
T1
T4
Converting by-pass screws
Depending on the gas type to which the appliances will be converted, there are two ways to adjust
the by-pass screws.
Please check the conversion table in the column “Modification” if the by-pass screws have to be
screwed completely in (see action 3A), replaced by a different by-pass screw (see action 3B) or
adjusted (see action 3C).
The values are also indicated on the top of the by-pass screws. The by-pass screws can be
reached from the top of the hob when the knobs are removed (B2).
Bekijk gratis de handleiding van Gorenje GKTW641SYB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GKTW641SYB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1978 MB |
