Handleiding
Je bekijkt pagina 13 van 41
4.2 Connecting the appliance
1. Open the cover of the connection terminal box.
2. Connect everything according to your type of appliance. The jumpers are provided on the connection
terminal.
3. Run the power cord through a cord strain relief (clamp) that protects the cable from being pulled
out.
4. For smaller diameter cables, remove the cord strain relief from the terminal and place it at a lower
position as shown in the figure below.
Terminal
1
2
3
1. Higher position (cables of larger diameters)
2. Lower position (cables of smaller diameters)
3. Cord strain relief
To remove the cord strain relief from a higher position, unscrew it first with a screwdriver, place it in
a vertical position and pull it out of the bracket with some force in the direction of the arrow.
To attach the cable holder to a lower position, first place it in a vertical position, then attach it to the
bracket using vertical force.
Connection diagram
Single phase connection (up to 32 A)
• Single-phase connection (1 1N, 220-240 V~/50 Hz):
- Voltage between line and neutral conductor is 220–240 V~. Install
a jumper between terminals 1 and 2, and between terminals 4 and
5.
- The circuit should be fitted with a fuse of up to 32 A. Power cord
core cross-sectional area should be at least 4 mm².
- If fuse is lower than 32 A, max currnet can be reduce in user
settings (see chapter Maximum power setting - "Power
management").
13
Bekijk gratis de handleiding van Gorenje GI6443BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6443BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2976 MB |
