Handleiding
Je bekijkt pagina 12 van 41
4. Connecting the induction hob to the power
mains
• Power mains protection must conform to the relevant regulations.
• Before connecting the appliance, make sure the voltage specified on the rating plate conforms to
the voltage of the power mains.
• There should be a switching device in the electrical installation that can disconnect all poles of
the appliance from the power mains, with a minimum clearance of 3 mm between the contacts
when open. Suitable devices include fuses, protective switches etc.
• The connection should be adjusted to the current and fuses.
• After installation, the parts carrying electrical current and insulated parts shall be protected against
contact.
WARNING!
The appliance may only be connected by an authorised expert. False connection can
destroy parts of the appliance. In such case, there is no right to warranty! Disconnect
the appliance from the power mains before any repair or maintenance operation.
WARNING!
The appliance can be connected to the power mains when the temperature of the
appliance is that of room temperature.
4.1 Power cord
(appliance without a power cord)
* Ferrules are not supplied.
INFORMATION!
We recommend using electric wire ferrules (end terminals).
• The following may be used for connection:
• PVC insulated connection cables type H05 VV-F with yellow-green protective conductor, or other
equivalent or superior cables.
• Exterior cable diameter should be at least 8.00 mm.
• Run the power cord through a cord strain relief (clamp) that protects the cable from being pulled
out.
12
Bekijk gratis de handleiding van Gorenje GI6443BSCWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6443BSCWF |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2976 MB |
