Handleiding
Je bekijkt pagina 23 van 34
Ensure that the induction hob is well ventilated and that the air inlet and outlet are not blocked. To
avoid accidental contact with the overheated bottom of the hob or an unforeseeable electric shock
during work, it is necessary to install a wooden insert fixed with screws at a minimum distance of 15
mm from the bottom of the hob. Observe the following requirements.
There are ventilation holes around outside of the hob. You need to ensure these holes are not
blocked by the worktop when you put the hob into position
.
•
Make sure that the adhesive that bonds the plastic or wood material to the furniture
cannot withstand a temperature of less than 150°C to prevent the cladding from coming
loose.
•
The back panel, the adjacent and surrounding surfaces must therefore be able to
withstand a temperature of 90°C.
Before Installing the Hob, Make Sure That
•
The work surface is rectangular and flat, and no structural elements interfere with the
space required.
•
The worktop is made of a heat-resistant and insulated material.
•
If the hob is installed above an oven, the oven has a built-in cooling fan.
•
The installation must comply with all clearance requirements and applicable standards and
regulations.
•
A suitable disconnect switch, which allows complete disconnection from the electrical
supply, is integrated into the fixed wiring and is fitted and positioned to comply with local
wiring rules and regulations.
•
The disconnect switch shall be of an approved type and shall have a contact separation of
3 mm air gap in all poles (or in all active [phase] conductors if local wiring regulations
permit this deviation from the requirements).
•
The disconnect switch must be easily accessible to the customer when the hob is installed.
•
If in doubt, consult local building authorities and regulations for installation.
•
You use heat-resistant and easy-to-clean surfaces (e.g. ceramic tiles) for the wall surfaces
around the hob.
After Installing the Hob, Make Sure That
•
The power supply cable is not accessible through cupboard doors or drawers.
•
There is a sufficient flow of fresh air from outside the cupboard to the base of the hob.
•
If the hob is installed above a drawer or cupboard space, a heat protection barrier is fitted
under the base of the hob.
•
The isolating switch is easily accessible to the customer.
Max. 5mm
Max. 5mm
23
Bekijk gratis de handleiding van Gorenje GI6442BSCE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GI6442BSCE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2860 MB |
