Handleiding
Je bekijkt pagina 13 van 24
12
MAINTENANCE & CLEANING
Be sure to unplug the appliance from the power supply and wait for the appliance to cool down. Children
should not clean the appliance or perform maintenance tasks without proper supervision.
Aluminium finish (gas burner)
Clean the aluminium finish with non-abrasive liquid cleaners intended for such surfaces. Apply the cleaner onto a wet
cloth and clean the surface. Then, rinse the surface with water. Do not apply the cleaner directly onto the aluminium
finish. Do not use abrasive cleaners or sponges.
The aluminium-coated surfaces should not come into contact with oven cleaning sprays as this may result in
visible and permanent damage.
Stainless steel sheet front side of the housing (depending on the model)
Clean this surface only with a mild detergent (soapsuds) and a soft sponge that will not scratch the finish. Do not use
abrasive cleaners or cleaners containing solvents as they may damage the housing finish.
Lacquer-coated surfaces and plastic parts (depending on the model)
Do not clean the knobs and buttons, door handles, stickers, and rating/type plates with abrasive cleaners or abrasive
cleaning materials, alcohol-based cleaners, or with alcohol. Immediately remove any stains with a soft non-abrasive
cloth and some water, in order to avoid damaging the surface. You may also use cleaners and cleaning materials
intended for such surfaces as instructed by their respective manufacturers.
Enamel surfaces (oven, cooking hob)
Use a damp sponge with detergent for cleaning. Fatty stains can be removed with warm water and special detergent
for enamel. Never clean enamelled surfaces with abrasive means producing irremovable damage to the appliance
surface.
Glass surfaces
Do not use rough abrasive cleaning agents or sharp metal scrapes for cleaning of oven door glass, as they could crack
the surface and causing the breaking of glass. Clean the glass surfaces with special means for glass, mirrors and
windows.
INFORMATION!
Never use aggressive or abrasive cleaners.
GAS BURNER
The grid, cooking surface, and burner parts may be cleaned in hot water with some
washing up detergent. Do not clean them in a dishwasher. Clean the thermocouple and
the spark plug with a soft brush. These parts have to be spotlessly clean to function
correctly. Clean the burner crown and cap. Make sure the slots on the burner crown are
not clogged or otherwise blocked. After cleaning, thoroughly dry all the parts and
reassemble them correctly. Any party placed askew will make burner ignition harder.
Burner caps are finished in black enamel. Due to high temperatures, discoloration cannot be avoided. However,
it does not affect burner operation.
OVEN
Clean the oven walls with a damp sponge and detergent. To clean stubborn stains burned into the oven wall use a
special detergent for enamel. After cleaning carefully wipe the oven dry. Clean the oven only when it is completely
cold. Never use abrasive agents, because they will scratch enameled surface. Wash the oven utensils with a sponge
and detergent. You can also use special detergents to remove rough stains or burns.
USING THE AQUA CLEAN FUNCTION TO CLEAN THE OVEN
Ignite the gas in the oven and rotate the system selector knob to the AQUA CLEAN position . Pour 0,6 l water into
a baking tray and place it in the lower guide. After 30 minutes, food residues on the oven enamel walls will have
softened and they will be easy to clean with a damp cloth.
Use the “AQUA CLEAN“ system when the oven has fully cooled down.
Bekijk gratis de handleiding van Gorenje GG5A11WFFM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GG5A11WFFM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3780 MB |
