Handleiding
Je bekijkt pagina 20 van 36
19
DISPLAY UNIT – NIGHT MODE
This function will automatically dim the display (switch from high to the lowest display
illumination level) during night time (8:00 p.m. to 6:00 a.m.) Choose the “nGht“ setting.
Touch the or key to select the desired night-time display illumination, and confirm.
ADAPTIVE FUNCTION
This function allows adjusting the set cooking time. The function is deactivated as a
factory default, but it can also be activated. When the function is activated, the most
recent cooking program duration settings are displayed. Values from the most recent
cooking session will be used.
“AdPt“ will appear on the display unit. To deactivate the function, touch the or
key to select off. Follow the same procedure to re-activate the function. Select on on
the display unit.
FACTORY SETTINGS
This function allows resetting the appliance to factory settings. “FAct“ will appear on
the display unit. Touch the or key to select “rES“ to choose the factory settings,
and confirm by pressing and holding the “start I stop“ key. Hold the key until all lit
dashes disappear.
WARNING!
After a power outage or after the appliance is switched off, additional function settings will remain stored for
no more than a few minutes. Then, all settings, except for the acoustic signal volume and display dimmer will
be reset to factory defaults.
STARTING THE COOKING PROCESS
The dash above the “start I stop“ key is partially lit. Press this key to run the set program.
During program operation, the dash above the key will light more brightly (will be fully illuminated).
INFORMATION!
If no timer function is selected, cooking time will appear on the display unit. When the oven reaches the set temperature,
an acoustic signal will be sounded and °C will appear on the display unit.
EXTRA GRATIN
The function can only be started after 10 minutes of oven operation (the dash above the gratin key will be
partially lit). When the function is confirmed, cooking time 10 minutes (10:00) will appear on the display unit.
Touch the or key to set the gratin duration.
The function can also be deactivated by pressing the “gratin“ key.
The function is used in the last stage of baking or after the baking process when you add sauce (wet rub) or dry rub
onto the food, or when you wish to additionally brown the crust. A golden-brown crust will form on the dish during the
gratin process, which protects the food from drying out, while also imparting a more pleasant appearance and better
flavour.
END OF COOKING AND SWITCHING OFF THE OVEN
Press the “start I stop“ key to pause the cooking process. “End“ appears on display unit and an acoustic signal is
emitted.
Turn the COOKING SYSTEM SELECTOR KNOB to position "0".
INFORMATION!
After the cooking process, all timer settings are also stopped and deleted, except for the minute minder. Time of day
(clock) will be displayed.
After the use of the oven, some water may be left in the condensate channel (underneath the door). Wipe the channel
with a sponge or a cloth.
Bekijk gratis de handleiding van Gorenje GEIT6E63XPG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gorenje |
| Model | GEIT6E63XPG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4701 MB |
