Goodwe Polaris BMT-P2/144A handleiding
Handleiding
Je bekijkt pagina 8 van 36
BMT-P2/144A(550W)P8
STANDARD INSTALLATION MANUAL FOR POLARIS 580W (HOOP INSTALLATION)
● The product can generate electricity under sunlight, so it is strictly prohibited to sho-
circuit the output cable. Otherwise, the output cable may overheat, resulting in the melting of
the cable's outer casing.
● Installation should be stopped when it is raining, the roof is damp or the ground is wet,
otherwise there is a risk of falling or electric shock.
● Construction personnel should wear non-slip footwear or slip resistant shoe covers during
construction and have reliable protection against falls.
● Construction should be strictly carried out in accordance with the product construction
node drawings, while avoiding reverse water impact on the Sun shed system, otherwise there is
a risk of water leakage.
● DO NOT lift the product by the junction boxes or cables, as it is likely to damage the product
or result in the falling down of components.
● During the process of transpoation, the product is prone to breakage if it falls down.
● DO NOT twist the product during installation, this will damage the product or cause other
damages.
● DO NOT bring the product into direct contact with any rigid material, as this will cause them
to break.
● The product should be installed on a roof pitched 5° to 45° to ensure roof water tightness.
● When construction is interrupted, unconnected cable connectors should be protected
against water.
WARNING
BE CAREFUL
4
SAFETY WARNING
Bekijk gratis de handleiding van Goodwe Polaris BMT-P2/144A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | Polaris BMT-P2/144A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8693 MB |
