Goodwe GW50K06-ETC handleiding
Handleiding
Je bekijkt pagina 21 van 74
17
03 Product Introduction
User Manual V1.2-2024-10-30
No� Parts Description
4 O-grid
mode
When the grid is powered o, the inverter switches to the O-grid mode
and continues to supply power to the load via BACK-UP port.
• If a fault is detected, it enters the Fault mode.
• If the conditions do not meet the requirements for grid connection and
the o-grid output function is not turned on, it enters the Wait mode.
• If the conditions meet the requirements for grid connection and and
the o-grid output function is turned on, it enters the Self-check mode.
• If there is an update request, the inverter enters the Updating mode.
5 Fault
mode
• If a fault is detected, the inverter enters the Fault mode. When the fault
is cleared, it enters the Wait mode.
• If there is an upgrade request, the inverter enters the Updating mode.
6 Updating
mode
Enters the Upgrade mode when the inverter is upgarding the software.
When the upgarding is nished, it enters the Waiting mode.
3�4 Features
For a safe operation, the inverter will automatically reduce the output power when the operating
environment is not ideal.
The following are the factors that may cause power derating. Please try to avoid them when the
inverter is working.
• Unfavorable environmental conditions, e.g., direct sunlight, high temperature, etc.
• Inverter's output power percentage has been set.
• The voltage of the grid varies with the frequency.
• Higher input voltage value.
• Higher input current value.
Power derating
Bekijk gratis de handleiding van Goodwe GW50K06-ETC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K06-ETC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8531 MB |
