Goodwe GW50K-SMT-L-G10 handleiding
Handleiding
Je bekijkt pagina 7 van 58
02 Safety Precaution
3
User Manual V1.2-2025-01-16
2.4 Inverter Installation
DANGER
• Do not apply mechanical load to the terminals, otherwise they can be damaged.
• All labels and warning marks must be clear and distinct after the installation. Do not block,
alter, or damage any label.
• Warning labels on the inverter are as follows.
2.3 AC Side
WARNING
• The voltage and frequency at the connecting point should meet the on-grid requirements.
• An additional protective device like the circuit breaker or fuse is recommended on the AC
side. Specication of the protective device should be at least 1.25 times the Max. output
current of the inverter.
• Copper is recommended for the AC output cables. Aluminium cables are allowed, but only
with the addition of copper to aluminium adapter terminals.
HIGH VOLTAGE HAZARD.
Disconnect all incoming power
and turn o the product before
working on it.
Delayed discharge. Wait 5 minutes
after power o until the components
are completely discharged.
Read through the guide before
working on this device.
Potential risks exist. Wear proper
PPE before any operations.
High-temperature hazard. Do
not touch the product under
operation to avoid being burnt.
Grounding point. Indicates the
position for connecting the PE cable.
CE marking Do not dispose of the inverter
as household waste.Discard the
product in compliance with local
laws and regulations, or send it back
to the manufacturer.
5min
Bekijk gratis de handleiding van Goodwe GW50K-SMT-L-G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SMT-L-G10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6698 MB |
