Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 62 van 127
08 System Commissioning
58
Parameters Description
LVRT
With LVRT on, the inverter will stay connected with the
utility grid after a short-term utility grid low voltage
exception occurs.
HVRT
With HVRT on, the inverter will stay connected with the
utility grid after a short-term utility grid high voltage
exception occurs.
Power Limit
Set the power fed back into the utility grid according to
the actual situation.
Set Power Limit
Pv1 Shadow MPPT
Enable the shadow scan function if the PV panels are
shadowed.
Pv2 Shadow MPPT
Pv Time Interval Set the scan time according to the actual need.
Set Modbus Addr Set the actual Modbus address.
Set Sunspec
Set the Sunspec based on the actual communication
method.
ARC Enable
The function is optional and o by default. Please open
or close it according to actual need.
ARC Self Check Detect if the ARC function is normal.
ARC Fault Clear Clear the ARC Fault.
Set Password
The password can be adjusted. Please record the new
password and if you lose the password, please contact
the after-sales service center.
Set Grid Type
Set the grid type according to the actual situation. Star
and Delta grid are supported.
Set N-PE
To enable the detection of N line to ground insulation
resistance.
Reset Settings Restore part of factory settings.
View Faults Check historical fault records of the inverter.
Clear Faults Clear historical fault records of the inverter.
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
