Goodwe GW50K-SDT-C30 handleiding
Handleiding
Je bekijkt pagina 61 van 127
08 System Commissioning
57
8.1.2 Inverter Parameter Introduction
Parameters Description
Normal
=0.0W
Home page. Indicates the real-time power of the invert-
er.
Date Time Check the time of the country/region.
Vpv1= xxx V Check the DC input voltage of the inverter.
Vpv2= xxx V Check the DC input current of the inverter.
Vac Check the voltage of the utility grid.
Iac Check the AC output current of the inverter.
Fac Check the frequency of the utility grid.
E-Today
Check the genenominal power of the inverter for that
day.
E-Total Check the total genenominal power of the inverter.
Serial Number Check the serial number of the inverter.
GW10K-SDT-30
RSSI: xx%
Check the signal strength of the Smart Dongle.
Firmware M/S Check the rmware version.
Comm Version Check the communication version.
Set Language Set the display language.
Set Safety
Set the safety country/region in compliance with the
local grid standard and application scenario of the
inverter.
Set Date
Set time according to the actual time in the country/
region where the inverter is located.
Set Time
W/L Reset Power o and restart the Smart Dongle.
W/L Reload
Restore the factory settings of the Smart Dongle.
Recongure the Smart Dongle network parameters
after restoring the factory settings
PF Adjust
Set the power factor of the inverter according to the
actual situation.
Set ISO
Indicates the PV-PE insulation resistance threshold
value. When the detected value is under the set value,
the IOS fault occurs.
Bekijk gratis de handleiding van Goodwe GW50K-SDT-C30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW50K-SDT-C30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11037 MB |
