Goodwe GW30K-ET handleiding
Handleiding
Je bekijkt pagina 9 van 184
9
WARNING
Ensure timely Charge after Battery discharge, otherwise it may cause excessive Discharge
of Battery, leading to Battery damage.
Do not use more than The nominal charging and discharging current pairs of Battery to
charge Discharge.
Batterycurrent may be affected by factors such as temperature, Humidity, and weather
conditions, which could lead to Battery current limiting and impact load-carrying capacity.
If the Battery fails to start, please contact the after-sales service center as soon as
possible. Otherwise, the Battery may be permanently damaged.
If the battery module needs to be replaced or battery module needs to be added, please
contact the after-sales service center.
Avoid performing Battery charge under low-temperature conditions, as it may lead to a
reduction in Battery system capacity.
Do not place unrelated items into any part of the battery cabinet.
Emergency Measures
Battery Electrolyte Leakage
If the battery module leaks electrolyte, avoid contact with the leaking liquid or gas. The
electrolyte is corrosive. It will cause skin irritation or chemical burn to the operator. Anyone
contact the leaked substance accidentally has to do as following:
Breath in the leaked substance: Evacuate from the polluted area, and seek immediate
medical assistance.
Eye contact: Rinse your eyes for at least 15 minutes with clean water and seek
immediate medical assistance.
Skin contact: Thoroughly wash the touch area with soap and clean water, and seek
immediate medical assistance.
Ingestion: Induce vomiting, and seek immediate medical assistance.
Fire
The battery may explode when the ambient temperature exceeds 150℃. Poisonous and
hazardous gas may be released if the battery is on fire.
In the event of a fire, please make sure that the carbon dioxide extinguisher or
Novec1230 or FM-200 is nearby.
The fire cannot be put out by ABC dry powder extinguisher. Firefighters are required to
wear full protective clothing and self-contained breathing apparatus.
2.3.4 Smart Meter Safety
WARNING
If the voltage of the power grid fluctuates, resulting in the voltage to exceed 265V, in this
case, long-term overvoltage operation may cause damage to the meter. It is recommended to
add a fuse with a rated current of 0.5A on the voltage input side of the meter to protect it.
Bekijk gratis de handleiding van Goodwe GW30K-ET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW30K-ET |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 40461 MB |
