Goodwe GW30K-ET handleiding
Handleiding
Je bekijkt pagina 8 van 184
8
2.3.3 Battery Safety
DANGER
The Battery system is a high-voltage system, and high voltage is present during
equipment operation. Before operating any equipment in the system, ensure that the
equipment has been POWER OFF to prevent electric shock DANGER. Strictly adhere to all
Safety Precautions in this manual and the safety labels on the equipment during
operation.
This Battery system is a high-voltage system. Keep away unless you are a qualified
professional. Do not touch or operate without permission.
This energy storage system is classified as heavy-duty equipment. During Installation and
maintenance, use appropriate equipment and tools and implement Protection measures.
Improper operation may result in personal injury or product damage.
Do not disassemble, modify, or repair the Battery or control unit without official
authorization from the equipment manufacturer, as it may result in electric shock
DANGER or equipment damage. beyond the manufacturer’s liability shall be liable for any
losses incurred.
The equipment must be installed on concrete or other non-combustible surfaces,
ensuring the foundation is level, sturdy, flat, dry, and has sufficient load-bearing capacity.
Depressions or tilting are prohibited.
Do not impact, pull, drag, squeeze, step on the equipment or puncture the equipment
casing with sharp objects, and do not place the Battery in fire, otherwise the Battery may
explode.
Do not place the Battery in a high-temperature environment. Ensure there are no heat
sources near the Battery and that it is not exposed to direct sunlight. A fire may occur if
the ambient temperature exceeds 60°C.
Do not use if Battery or control unit show obvious defects, cracks, damage, or other
conditions. Damage to Battery may result in electrolyte leakage.
Do not move the Battery system while the Battery is in operation.
When Installation Battery system, ensure correct polarity of the positive and negative
terminals. Do not reverse the polarity, as this may cause a short circuit, leading to
personal injury or property damage.
Never short-circuit the positive and negative terminals of the Battery. Short-circuiting the
Battery may cause personal injury, and the instantaneous high current generated by a
short circuit can release a large amount of energy, potentially leading to a fire.
When operating the equipment, ensure that the equipment is not damaged and the
system has no fault, otherwise there may be a risk of electric shock and fire.
Do not open the equipment cabinet door or touch any wiring terminals or components
during operation. Otherwise, there is a risk of electric shock.
The temperature of the enclosure may exceed 60°C during operation. Do not touch the
enclosure before it cools down; ensure it is not Installation within reach of
non-professional personnel.
During operation, do not plug or unplug the terminal or connecting cables, as this may
pose a safety hazard.
During operation, if any abnormal conditions occur, immediately Battery system the
POWER OFF and promptly contact the relevant personnel for handling.
Bekijk gratis de handleiding van Goodwe GW30K-ET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW30K-ET |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 40461 MB |
