Goodwe GW225K-HT handleiding
Handleiding
Je bekijkt pagina 6 van 54
02 Safety Precaution User Manual V1.2-2025-01-13
2
2 Safety Precaution
2.1 General Safety
2.2 DC Side
Notice
• The information in this document is subject to change due to product updates or other
reasons. This manual cannot replace the product labels or the safety precaution unless
otherwise specied. All descriptions here are for guidance only.
• Before installations, read through the user manual to learn about the product and the
precautions.
• All installations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
• Use insulating tools and wear personal protective equipment when operating the
equipment to ensure personal safety. Wear anti-static gloves, cloths, and wrist strips when
touching electron devices to protect the inverter from damage.
• Strictly follow the installation, operation, and conguration instructions in this manual. The
manufacturer shall not be liable for equipment damage or personal injury if you do not
follow the instructions. For more warranty details, visit https://en.goodwe.com/warranty.
asp.
WARNING
The inverters are designed and tested strictly complies with related safety rules. Read and
follow all the safety instructions and cautions before any operations. Improper operation
might cause personal injury or property damage as the inverters are electrical equipment.
DANGER
• Connect the DC cables using the provided DC connectors and terminals. The manufacturer
shall not be liable for equipment damage if other connectors or terminals are used.
• Conrm the following information before connecting the PV string to the inverter.
Otherwise, the inverter may be damaged permanently or even cause re and cause
personal and property losses. Damage and injury caused by failure to operate in
accordance with the requirements of this document or the corresponding user manual are
not covered by the warranty.
• Make sure that the positive pole of the PV string connects to the PV+ of the inverter. And
the negative pole of the PV string connects to the PV- of the inverter.
• Make sure that the open circuit voltage of the PV string connected to each MPPT shall
not exceed 1500V.
Bekijk gratis de handleiding van Goodwe GW225K-HT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | GW225K-HT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5930 MB |
