Goodwe Galaxy BMT-G4/108 handleiding
Handleiding
Je bekijkt pagina 10 van 26
P10
FIGURE 6
Construction steps:
● Before product construction, all materials and adhesives to be processed must be stored
for at least 24 hours under equal conditions (such as 5° C - 40° C) and protected from sunlight,
rainwater and other weather factors.
● Clean the roof substrate. The roof suace must be clean, d and free from oil, dust and
other waste pollution. Eve step in the construction process must prevent seconda
pollution of the cleaned material suace. If pollution occurs, the suace must be re-cleaned.
● The on-site construction should meet the requirements of the selected structural
adhesive for the construction environment, construction technology and other construction
requirements.
● The adhesive position should be determined by the chalk line, and the structural adhesive
should be applied according to the gluing rules at the location where the product needs to
be installed. (Figure 7)
● A distance of 30mm (±5mm) should be left between two adjacent products and a
maintenance access path of sucient width should be provided between two rows of
products. (Figure 6).
30mm
Bekijk gratis de handleiding van Goodwe Galaxy BMT-G4/108, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | Galaxy BMT-G4/108 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3387 MB |
