Goodwe EzLogger3000C handleiding

135 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 58 van 135
08 System Commissioning
53
User Manual V1.2-2025-04-15
Grid Parameter Setting
Parameter Description
Safety Code
Select based on the grid standards of the country/region where the
inverter is located and its application scenario.
SPD Detection Switch Enable or disable SPD detection function.
Power On (Allowing
Grid-connection Self-
test)
Issue power on instructions to allow grid connection self-test.
Shutdown (Not Allow-
ing Grid-connection
Self-test)
Issue power o instructions to stop grid connection self-test.
Output Method
Set whether the inverter's output includes the neutral (N) cable
based on its application scenario.
0: three-phase four wire (3W/PE); 1: three phase ve wire (3W/N/
PE).
Shadow Scan Function
Switch 1
PV strings may exist signicant shading in PV systems where the in-
verter is applied. Enabling this feature, allows the inverter to perform
a global MPPT scan at regular intervals to nd the maximum power
point.
Active Power Fixed
Value Derating
Adjust the active power output of the inverter by xed value.
Active Power Percent-
age Derating (0.1%)
Adjust the active power output of the inverter by percentage of rated
power.
Reactive Power Com-
pensation (PF)
Set the power factor of the inverter.
8.2.7 Setting Inverter Parameters
3
5
2
7
1
6
4
NOTICE
The parameters to be set vary with the inverter type. The actual setting interface prevails.
Supports selecting multiple inverters and parameterising the selected multiple inverters.
Enter 0 or 1 to enable or disable a function. 0 indicates disable the function, and 1 indicates
enable the function.

Bekijk gratis de handleiding van Goodwe EzLogger3000C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGoodwe
ModelEzLogger3000C
CategorieNiet gecategoriseerd
TaalNederlands
Grootte18464 MB