GLP WildBar 16 handleiding
Handleiding
Je bekijkt pagina 14 van 23
www.glp.de Wild Bar 16
14 Wild Bar 16 User Manual
● Signal source.
● Fixture’s current DMX address in large characters. If the fixture’s self-diagnosis
system detects an error, the fixture will flash an error message alternately with the
DMX address. This lets you see the DMX address and error message at a distance
from the fixture.
● If the fixture detects a valid, active network at one of the fixture’s etherCON ports, the
default screen will show a network icon to the left or right of the DMX address:
- Icon on left = data at Port A (on left of fixture when facing control panel)
- Icon on right = data at Port B (on right of fixture when facing control panel)
The fixture displays network speed below the network icon.
If the fixture does not detect a network at one of the ports, it displays NO LINK
instead of the network icon for that port.
● Below the current DMX address, the fixture displays in smaller characters the DMX
channels that the fixture is currently using.
In the example shown in Figure 3:
● The fixture is running CPU software version 0.2.2
● The fixture is set to DMX Mode 1
● The fixture is set to receive data via ArtNet
● The fixture’s DMX start address is 001
● The fixture is using DMX channels 1 to 27.
Using the control panel
The four control panel buttons around the display have the following functions
indicated by icons next to them on the display.
In the main screen:
QUICK MENU – Activates the Quick Menu
UP/DOWN – Press three times to open the live diagnostic tool
MENU – Activates the control panel if it is in sleep mode, then
opens the main menu
Bekijk gratis de handleiding van GLP WildBar 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | WildBar 16 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2741 MB |
