GLP Santinel handleiding
Handleiding
Je bekijkt pagina 10 van 36
www.glp.de
GLP Santinel User Manual 10
Using camlock fasteners
See Figure 3. Two receptacles for
camlock quick-release fasteners are
provided in the base of the Santinel to
allow secure fastening to the surface
that the Santinel is mounted on as well
as fast installation and removal. The
receptacles are spaced 140 mm (5.51
in.) apart and 175 mm (2.95 in.) from
the front of the base.
To use camlock fasteners:
1. Drill suitably dimensioned holes in
the mounting surface with
reference to Figure 3.
2. Pass two camlock quick-release
fasteners through the surface from
underneath, push them into the
receptacles in the base of the
Santinel and turn each fastener a
full 90° clockwise to lock it.
3. Make sure that the Santinel is held
securely. Make sure that the
fasteners are not accessible to
unauthorized persons.
Mounting on the Santinel Tower Stand
The Santinel Storage Tower
optional accessory is a
convenient solution that
provides storage space in a
lockable compartment.
To install the Santinel on its
Storage Tower:
1. Place the Tower Stand in
the desired location with
the lockable storage
compartment door facing
to the front.
2. If necessary, screw the
adjustable feet in the
base in or out until the
stand is perfectly stable
and does not rock in any
direction. Do not screw a
foot out of the base so far
that it becomes unstable
or falls out.
Figure 3. Receptacles for camlock fasteners
Figure 4. Santinel on Storage Tower
Bekijk gratis de handleiding van GLP Santinel, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Santinel |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3993 MB |
