GLP Matrix Eye 4 handleiding
Handleiding
Je bekijkt pagina 11 van 24
German Light Products Matrix Eye
Rev. 20250711-0 11
Intensity Effects (Shutter Mode)
The operator can select between different Intensity effects which independently ash
the LED heads in various sequences.
At DMX 000 all intensity effects are disabled and there will be normal Flashes
performing on all LED heads at the same time.
Tungsten Emulation
The xture can simulate the response of tungsten lamps by making the light output
“warmer” at lower levels (Red shift) and providing slow fade out. This lets you select
between different Tungsten Emulations based on standard Tungsten xtures.
The rst half of the control will emulate the Tungsten light source in Default Color
Temperature, Red Shift and Dimmer response.
The second half of the control will emulate the Tungsten light source but without the
linked Default Color Temperature. Then you can use any mixed color and the xture will
use the Dimmer response behavior of the selected light source.
Special/Control DMX channel
The Special/Control DMX channel lets you change xture settings and perform a xture
reset from the control desk (a possibility that can be very useful during a show or for a
specic scene). To apply a command on the Special/Control channel, you must hold the
command for the time indicated in the DMX channel index section at the end of this
user manual.
To trigger a reset using the Special/Control channel, you must send the DMX value for
this function for 3 seconds. If you want to trigger an additional reset using the
Special/Control channel, you must rst move away from the Reset DMX value and then
return to this value. This requirement to change DMX values eliminates the risk of the
xture entering an unwanted Reset loop if it is patched wrongly.
Note: Most of the xture settings available in the xture’s control menus or on the
Special/Control DMX channel are also available via RDM.
Fan modes
The options in Fixture Settings→Fan Mode let you give priority to lowest fan noise or
most powerful cooling.
● Regulated mode gives priority to light output and only operates fans as necessary.
● High mode sets the fans to constant operation at high speed with max light output,
good for high ambient temperature if noise isn’t a problem.
● Medium mode sets fans to constant operation at medium speed and light output
intensity is slightly reduced.
● Low mode sets fans to constant operation at low speed and light output is
signicantly reduced.
● Minimum mode sets fans to minimum speed when xture is lit, otherwise fans are
shut down. Light output is reduced.
Bekijk gratis de handleiding van GLP Matrix Eye 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Matrix Eye 4 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2951 MB |
