GLP Matrix Eye 2 handleiding
Handleiding
Je bekijkt pagina 16 van 24
www.glp.de Matrix Eye
16 Matrix Eye User Manual
DMX address. This lets you see the DMX address and error message at a distance
from the xture.
● Below the current DMX address, the xture displays in smaller characters the DMX
channels that the xture is currently using.
In the example shown in Figure 4:
● The xture is running CPU software version 0.1.2
● The xture is set to DMX Mode 1
● The xture is set to receive data via DMX
● The xture’s DMX start address is 001
● The xture is using DMX channels 1 to 19.
Using the control panel
The four control panel buttons under the display have the following functions.
In the main screen:
QUICK MENU – Activates the Quick Menu
UP/DOWN – Press three times to open the live diagnostic tool
MENU – Activates the control panel if it is in sleep mode, then opens the
main menu
When navigating through the menus:
BACK – Goes back one level towards the top of the menu
UP – Scrolls up or increments a number
DOWN – Scrolls down or decreases a number
ENTER – Conrms a setting or implements a command
At any time:
Bekijk gratis de handleiding van GLP Matrix Eye 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Matrix Eye 2 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2951 MB |
