GLP MAD MAXX handleiding
Handleiding
Je bekijkt pagina 8 van 32
www.glp.de GLP Mad Maxx
8 MAD MAXX Quick Start and Safety Manual
Fire safety and protection from burns
● Do not operate the MAD MAXX if the ambient temperature exceeds 45° C (115° F).
● The hottest parts of the fixture’s surface can reach up to 80° C / 176° F during
operation. Avoid contact by persons and materials. Do not install the fixture in a
location where there is a risk of accidental contact. Allow the fixture to cool for at
least 30 minutes before handling it.
● Keep the fixture well away from flammable materials.
● Do not illuminate surfaces within 1 m / 40 in. of the fixture. The light output from
the fixture is powerful enough to cause burns or fire in illuminated objects at
close range.
● Keep all combustible materials (e.g. fabric, wood, paper) at least 10 cm / 4 in. away
from the fixture.
● Ensure that there is free and unobstructed airflow around the fixture. Provide a
minimum clearance of 30 cm / 12 in. around fans and air vents.
● Do not place any optical components other than MAD MAXX accessories from
GLP onto the front of the fixture.
● Do not stick filters, masks or other materials onto the fixture. Do not block the
light output in any way. The front surface becomes hot during operation and can
melt or ignite objects that are in contact with the surface. Ensure that the front
surface is clean and unobstructed at all times in order to prevent a fire hazard and
damage to the fixture.
● The fixture’s optical components can focus the sun’s rays, creating a risk of fire
and damage. Do not expose the front of the fixture to sunlight or any other
intense light source, even from an angle.
Eye safety
● The MAD MAXX is classified as a Risk Group 2 lighting fixture according to
EN 62471. Possibly hazardous radiation emitted. Do not stare into the light output
from the fixture. May be harmful to the eyes.
● Do not look at the fixture’s light output with optical instruments or any device
that may concentrate the light output.
● Make sure that persons near to or working on the fixture are not looking directly
into the light output when the fixture lights up suddenly. This can happen when
power is applied, when the fixture receives a DMX signal, or when certain control
menu items are selected.
Bekijk gratis de handleiding van GLP MAD MAXX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | MAD MAXX |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4369 MB |
