GLP MAD MAXX handleiding
Handleiding
Je bekijkt pagina 23 van 32
German Light Products GLP MAD MAXX
Rev. 20250625-1 23
● Pin 2 = Negative / data cold
● Pin 3 = Positive / data hot.
● Pins 4 and 5 are not used.
To link fixtures in cabled DMX daisy-chains using their XLR connectors while
maintaining the fixture’s IP65 protection, use Neutrik TOP 5-pin XLR connectors only.
Use certified DMX cable only.
Ethernet link
See ‘Fixture overview’ on page 15. The fixture has two IP65-rated Neutrik EtherCON
TOP ports for connection to an Ethernet link. To connect fixtures to an Ethernet link
while maintaining their IP65 protection, use network cable with Neutrik EtherCON
TOP RJ45 connectors only.
7. Using the fixture
Warning! Read ‘Safety’ starting on page 5 before operating the GLP MAD
MAXX.
For guidance on using the GLP MAD MAXX, see the latest version of the fixture’s User
Manual, available for download from www.glp.de. Check that the software version
given at the front of the user manual matches the software version installed in the
fixture.
Check that the pan and tilt locks are released and that there is no risk of the head
colliding with other fixtures, objects or people before applying power.
When power is applied, the fixture carries out a reset which takes a few seconds. Be
prepared for the yoke and head to move during the reset. If the fixture is not
receiving DMX commands, the head then moves to its idle position (pan 50%, tilt
100%).
Bekijk gratis de handleiding van GLP MAD MAXX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | MAD MAXX |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4369 MB |
