GLP MAD MAXX handleiding
Handleiding
Je bekijkt pagina 12 van 32
www.glp.de GLP Mad Maxx
12 MAD MAXX Quick Start and Safety Manual
Condensation
High humidity and strong temperature fluctuations can lead to condensation inside
fixtures. When a fixture is brought from a colder to a much warmer environment, the
risk of condensation is particularly high. Do not switch on the fixture immediately.
Let it warm up to room temperature before connecting it to power.
In order to ensure that the fixture performs as it should, we strongly recommend that
you first bring the fixture to operating temperature and keep it there for at least 30
minutes. This ensures that any moisture that has accumulated internally can escape
via the vent valve. The time required for residual moisture to escape completely
depends heavily on the ambient conditions of the installation and must be adapted
according to the situation.
Exterior maintenance
Devices used in outdoor or harsh environments need more frequent service. If the
equipment is to be used outdoors or in a harsh environment for a long period, check
the installation and all cable connections regularly, at least every 30 days.
● Perform an external visual inspection of the housing surfaces, all connections, and
their bolts and seals.
● Look for signs of contamination or corrosion.
● Check the optics and the cooling system for contamination.
Based on the first days of operation, plan the required maintenance actions and the
maintenance intervals. Bear in mind that maintenance work may have to be carried
out outdoors.
Due to the increased environmental stress when a fixture is installed outdoors,
maintenance must be carried out regardless of whether the fixture has been in
operation or not.
We recommend that you apply a permanent wax to the fixture housing, as this will
protect against the accumulation of contaminants.
We recommend that you carry out an annual inspection, both inside and outside the
fixture. To ensure water- and dust-tightness, we recommend that you replace vent
valves and seals at this time.
Avoiding damage from dust and airborne particles
● Carry out regular visual inspections of the fixture to make sure that there is no
accumulation of dirt, especially on the front glass and on air vents.
● If cleaning is necessary, follow the instructions in ‘Service and maintenance’ on
page 24.
Transport and storage
● Transport the fixture either in a flightcase or in its original packaging to protect it
from damage caused by shocks during transportation.
● Check that the head is supported and release the pan and tilt locks before
transporting the fixture.
● Store the fixture in a dry location when not in use.
Bekijk gratis de handleiding van GLP MAD MAXX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | MAD MAXX |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4369 MB |
