GLP KNV PSU Rigging handleiding
Handleiding
Je bekijkt pagina 10 van 67
www.glp.de
10 KNV Dot and Line User Manual Rev. V34-20210820-1
5. Features
The KNV Dot and Line from GLP are powerful strobe/color effect lighting fixtures that
can be interlocked and combined, giving enormous creative possibilities. When KNV
Dot and Line fixtures are fastened together using hardware accessories from GLP, their
pixel pitch and DMX control setup coordinate easily with KNV Cube and Arc fixtures.
This allows all four types of fixture to be integrated easily into creative installations.
KNV Dot and Line fixtures combine powerful white light output from one 30 W cool
white LED per pixel with bright color output from sixteen 0.25 W high-quality RGB LEDs
per pixel in a circle around the white LED. The arrangement gives a total luminous flux
of up to 2 200 lumens per pixel.
Fixtures can be used indoors in permanent and temporary installations. Their rugged
construction and IP54 rating mean that they can also be used outdoors in temporary
installations if precautions are taken to prevent immersion in water and damage from
direct sunlight. They can be placed upright on a level surface or suspended from a
suitable structure as described in the KNV Dot and Line Quick Start and Installation
Manual.
Four mounting points with M3 threaded holes are provided on the front of fixtures for
mounting optical accessories from GLP.
Power and data can be daisy-chained between KNV Dots.
All fixtures can be interlocked with quick-release mechanical fasteners for ease of
installation.
The KNV is not suitable for household use, for use in any location where unattended
children have access to it, or for use in permanent outdoor installations.
Controlling fixtures and the KNV PSU
KNV Dot and Line fixtures can be controlled as individual pixels or as groups of pixels
using any standard DMX controller. White and color output can be controlled
separately or combined for stunning strobe, continuous output and wash effects. Using
the powerful multilayer FX engine integrated into the KNV system, complex dynamic
effects can be created quickly with no need for a separate pixel-mapping media
server.
Fixtures are set up and controlled via the KNV PSU, a separate external power supply
and control unit with an integrated control panel and display. Each KNV PSU can
manage up to 25 pixels. These pixels can consist of 25 x KNV Dot fixtures, 5 x KNV Line
fixtures, or a mixture of the two fixture types. Depending on which DMX mode you use,
you can group control the pixels in groups or individually. Individual pixel control
combined with the freedom to locate individual pixels almost anywhere you want in
the installation gives enormous creative flexibility.
DMX control commands are similar – but not identical –to those of KNV Cube and Arc
fixtures. Fixtures can be configured to behave identically or symmetrically if they are
placed in the installation and pixel mapped with this in mind. For detailed guidance on
setting up pixel mapping, see page 26.
Bekijk gratis de handleiding van GLP KNV PSU Rigging, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | KNV PSU Rigging |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11419 MB |
