GLP JDC1 handleiding
Handleiding
Je bekijkt pagina 7 van 76
German Light Products®
JDC1 User Manual Rev. 20240830-01 7
Fire safety and protection from burns
• Do not operate the product if the ambient temperature (Ta) exceeds 45° C (115° F).
• The surface of the product’s casing can reach up to 160° C (320° F) during
operation. Avoid contact by persons and materials. Do not install the product in a
location where there is a risk of accidental contact. Allow the product to cool for at
least 20 minutes before handling
• Keep the product well away from flammable materials.
• Keep all combustible materials (e.g. fabric, wood, paper) at least 1 m (3.3 ft.) away
from the head.
• Ensure that there is free and unobstructed airflow around the product. Provide a
minimum clearance of 100 mm (4 in.) around fans and air vents.
• Do not illuminate surfaces within 1 m (3.3 ft.) of the product. The light output from
the product is powerful enough to cause burns or fire in illuminated objects at close
range.
• Do not install a fuse that has a higher rating than the one originally installed in the
product. Do not bypass fuses.
• Do not stick filters, masks or other materials onto the front glass. Do not block the
light output in any way. The front glass becomes extremely hot during operation and
can melt or ignite objects that are in contact with the surface. Ensure that the front
glass Is clean and unobstructed at all times in order to prevent a fire hazard and
damage to the product.
• The product’s optical components can focus the sun’s rays, creating a risk of fire
and damage. Do not expose the front of the product to sunlight or any other
intense light source, even from an angle.
Eye safety
• The JDC1 is classified as a Risk Group 2 lighting fixture according to EN 62471.
Possibly hazardous radiation emitted. Do not stare into the light output from the
product. May be harmful to the eyes.
• Do not look at the product’s light output with optical instruments or any device that
may concentrate the light output.
• Make sure that persons near to or working on the product are not looking directly
into the light output when the product lights up suddenly. This can happen when
power is applied, when the product receives a DMX signal, or when certain control
menu items are selected.
Bekijk gratis de handleiding van GLP JDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9927 MB |
