GLP JDC Line 1000 handleiding
Handleiding
Je bekijkt pagina 15 van 72
German Light Products®
JDC Line 1000 User Manual 15
Manual control
If the JDC Line 1000 is connected to mains power, you can control it without using a
DMX controller if you open the Manual Control menu in the control panel.
This menu also lets you reboot the fixture.
If the fixture is connected to a DMX controller, it is also possible to take a snapshot of all
the DMX values that the fixture is receiving using a Capture DMX Values command.
These values are then applied as manual control values and stored in memory. Each
time that you enter the Manual DMX menu, the fixture will use these values until you
adjust them or apply a Reset Manual Values command.
Custom settings and reloading factory defaults
Custom settings are stored after a power off/on cycle and after a reset.
Two options are available in the fixture’s control panel for deleting multiple custom
settings and restoring defaults:
● Fixture Settings → Load Settings → Default reloads all the fixture’s factory default
settings except DMX address, DMX mode and Control protocol. This option returns
the fixture to baseline settings (Normal pixel orientation, Linear dimming curve, etc.)
without affecting its basic configuration in an installation.
● Service → Advanced → Load Factory Backup reloads all the fixture’s factory default
settings including DMX address, DMX mode and Control Protocol. This option
reinitializes the fixture completely and returns to its state when it left the factory.
Service
The Service menu is split into two levels: Service and Service Advanced.
The Service Advanced level is for trained technicians only. Read the User Manual
carefully before entering this level.
Test Sequences
This menu lets you run different test sequences in order to quickly check the product
for correct operation.
Reset Counters
The commands in this menu let you reset the fixture’s user resettable counters.
Note that device counters are not reset if you execute a Load Factory Backup
command.
Bekijk gratis de handleiding van GLP JDC Line 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC Line 1000 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 12188 MB |
