GLP impression X5 IP handleiding
Handleiding
Je bekijkt pagina 31 van 41
www.glp.de X5 IP
Rev. 20250129-01 31
Setting up the control protocol
The impression X5 IP can be controlled using:
● USITT512 DMX over a standard DMX cable link using the fixture’s 5-pin XLR
connectors
● DMX via Art-Net or sACN using one of the fixture’s two Ethernet ports
● GLP’s wireless iQ.Mesh technology
● LumenRadio CRMX. The integrated GLP FPO (Flexible Protocol Option) port
allows the installation of an additional protocol module. The fixture is supplied
with a LumenRadio CRMX module installed in the FPO port as standard.
This section explains how to configure the fixture to use one of these control data
protocols.
Note: The control protocol settings are not affected if you apply a Fixture Settings
→
Load User Settings
→
Setting Defaults command in the fixture’s control panel,
but they are returned to factory defaults if you apply a Load Factory Defaults
command in the main menu.
DMX
The fixture is set up for control via a standard DMX cable link by default.
If the control data protocol has been changed and you want to return to DMX
control over a standard DMX cable link:
Open the menus in the fixture’s control panel.
In the main menu, open DMX Address and give the fixture a suitable DMX
address.
In the Protocol Setup → Data In menu, set the control protocol to DMX.
Art-Net
To configure the fixture to receive DMX control data via Art-Net, open the menus in
the fixture’s control panel and make the following adjustments:
In the first menu (root menu), give a suitable DMX address to the fixture.
In the Protocol Setup → Protocol Type menu, set the control protocol to Art-
Net.
Give all fixtures their own unique IP addresses. To do this, you can either:
● set fixtures to generate their own IP addresses by choosing the ranges 2.x.x.x or
10.x.x.x (Art-Net specification),
● set fixtures to acquire IP addresses automatically by DHCP, or
● assign IP addresses manually by entering individual IP addresses and Subnet
mask.
Select an Art-Net port/universe from 00000 (Network 0 / Subnet 0 / Universe 0)
to 32767 (Network 7 / Subnet 15 / Universe 255). Note that the first Art-Net
universe is considered to be universe number 00000, not 00001.
Bekijk gratis de handleiding van GLP impression X5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4489 MB |
