GLP impression X5 IP handleiding
Handleiding
Je bekijkt pagina 13 van 41
www.glp.de X5 IP
Rev. 20250129-01 13
● Double flash provides a quick double flash. Speed can be adjusted from slow to
fast.
● Strobe random pixel (only available when the fixture is set to a DMX mode with
individual pixel control) strobes individual pixels at random to give a kind of
sparkling effect. Speed can be adjusted from slow to fast.
● Strobe random all strobes all of the fixture’s pixels together at random intervals,
allowing a random strobe between multiple fixtures. Speed can be adjusted
from slow to fast. Note that the random effect across multiple fixtures really is
random!
● Strobe sync strobes all of the fixture’s pixels together and also synchronizes the
strobe in multiple fixtures so that all the fixtures flash at the same time. Speed
can be adjusted from slow to fast.
Note: Depending on the selected Sub Module Mode, the dimmer and shutter
channels of the Sub module can operate independently of or subordinately to the
dimmer and shutter channels of the Main module.
Intensity
The electronic dimming effect provides smooth 16-bit dimming of the Main module
and Sub module. Three dimming curves with different dimming characteristics are
available. See ‘Dimming curves’ on page 18.
Pattern control
The impression X5 IP offers a wide range of static and dynamic pre-programmed
FX patterns on the Sub module. The Sub module color control channels define the
color of the pattern effects.
A static pattern is a fixed pattern with only one pattern step. This allows you a very
quick selection of a non-dynamic effect. The pattern has active and inactive pixels.
Each active pixel shows the selected pattern color while each inactive pixel is fully
transparent.
A dynamic pattern is a sequence of pattern steps that has active and inactive pixels.
Each active pixel shows the selected pattern color while each inactive pixel is fully
transparent. You can set pattern steps to automatically change continuously
(Pattern Speed) or you can directly select pattern steps (Pattern Index).
Note: The Mix Priority channel lets you decide how the output of the Main module
and the Sub module (pattern or pixel mapping) should be merged.
Pattern selection
The pattern selection channel offers a choice of 59 static patterns, 50 dynamic
patterns and 11 special patterns. The dynamic patterns offer multiple pattern steps
for individual step selection or continuous pattern step chasers.
Pattern 0 (DMX 000) is the idle pattern and just sets all pixels to active.
The Random Pixel FX pattern at the end of the Pattern Select channel randomly
selects pixels to create an attractive sparkle effect.
Bekijk gratis de handleiding van GLP impression X5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4489 MB |
