GLP Impression X5 Compact handleiding

Verlichting

GLP

83 pagina's

PDF beschikbaar

Handleiding

German Light Products®    X5 Compact 
  impression X5 Compact User Manual  9 
Pan and tilt position feedback and self-correction 
The fixture has a pan/tilt position feedback and self-correction system that brings the 
head back to its correct position if it was unintentionally moved. When correcting pan 
and/or tilt, the fixture at first tries twice to move to the correct position. If it cannot 
move to this position, it waits for a short period and then tries again.  
Position feedback is automatically disabled for a short time if you press one of the 
control panel buttons on the yoke. This feature lets an operator move the yoke 
manually for more convenient use of the control panel and display. Pan and tilt remain 
automatically disabled while you are using the fixture’s control panel.  
Position feedback can also be set to constantly disabled using the Fixture Settings → 
Position Feedback setting (see ‘Position feedback’on page 22) or via DMX on the 
Special/Control channel. 
Fixture performance and speed options 
You can adjust the speed (and noise level) of pan and tilt movement, as well as the 
speed of all other mechanical effects, by selecting from three different performance 
options (see ‘Performance modes‘ on page 18). 
Zoom 
The impression X5 has motorized zoom control. Control on the Zoom DMX channel 
moves from spot to flood as the DMX value increases. 
You can adjust the speed (and noise level) of zoom movement, as well as the speed 
of all other mechanical effects, by selecting from three different performance options 
(see ‘Performance modes‘ on page 18). 
Main and Sub modules 
Some control modes divide the fixture into two or more modules or layers (Main 
module and Sub modules). For example, Control Mode 2 divides the Washlight into: 
●  Main module (Layer 1 = one RGB(L) Wash fixture)  
●  Sub module (Layer 2 = pattern engine with segment or individual pixel control). 
The Sub module has its own intensity and shutter channels. Professional controllers will 
handle this setup in a smart multi-fixture profile. 
The Sub module mode setting lets you decide whether the Sub module should be 
subordinate to or independent of the Main module  (see ‘Sub module mode / Sub 
fixture mode’ on page 20). 
Individual Segment or Pixel Control 
The impression X5 Compact provides seven individually controllable pixels. Each pixel 
cell houses a 40 W RGBL LED that can be controlled individually in intensity and color to 
create dynamic effects and pixel mapping.  
The fixture’s different DMX control modes offer different options for working with the 
individual segments or pixels.  

Bekijk gratis de handleiding van GLP Impression X5 Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.