GLP Impression X5 Compact handleiding

Verlichting

GLP

83 pagina's

PDF beschikbaar

Handleiding

www.glp.de    X5 Compact 
8  Rev. 20230928-01 
  Features 
Light source 
The impression X5 Compact features a powerful light engine containing 7 x 40 W RGBL 
LEDs. 
Control options 
The impression X5 Compact is compatible with DMX 512 and RDM control protocols. 
Other control options via Ethernet are currently in preparation for inclusion in a future 
firmware release. 
The fixture also features GLP iQ.Mesh and GLP’s FPO (Flexible Protocol Option) Port. The 
GLP iQ.Mesh Module allows easy configuration, control, service and maintenance via 
the GLP iQ.Service App. The FPO port allows you to use control options such as 
LumenRadio CRMX if a CRMX module accessory is installed. The CRMX and other FPO 
modules can be supplied on request (GLP Service can give details). 
Powering on 
When power is applied to the fixture and no valid DMX signal is present, the head 
moves automatically to its home position (pan center/tilt center).  
Pan and tilt 
The impression X5 Compact has motorized pan and tilt movement with coarse and 
fine control channels. 
Pan and tilt range 
For details of pan and tilt angles, see the technical specifications in the impression X5 
Compact Quick Start and Safety Manual supplied with the fixture and available for 
download from www.glp.de. 
It is possible to change the pan range from the standard angle to the maximum 
possible angle using the Fixture Settings → Pan range setting (see ‘Pan Range’ on 
page 23).  
Tilt range can be limited using the Fixture Settings → Accessory setting (see 
‘Accessories and tilt range’ on page 23) to avoid damage if an external accessory is 
installed on the head. 
Direction of pan and tilt movement 
With the fixture standing on the ground, increasing the pan DMX value moves the yoke 
clockwise from its home position. Pan direction can be reversed using the Fixture 
Settings → Pan Invert setting (see ‘Pan Invert‘ on page 22) or via DMX on the 
Special/Control channel. 
With the fixture standing on the ground, increasing the tilt DMX value moves the head 
towards the front from its home position. Tilt direction can be reversed using the Fixture 
Settings → Tilt Invert setting (see ‘Tilt Invert’ on page 22) or via DMX on the 
Special/Control channel. 

Bekijk gratis de handleiding van GLP Impression X5 Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.