GLP Impression X5 Compact handleiding
Handleiding
Je bekijkt pagina 25 van 83
German Light Products® X5 Compact
impression X5 Compact User Manual 25
Service
The Service menu is split into two levels: Service and Service Advanced. The Service
Advanced level is for trained technicians only. Read the information below carefully
before entering this level.
The Service menu contains the following items:
● Live Diagnostic: Calls up an overview of all main fixture information, signal quality
and settings. This can be helpful while troubleshooting or talking to GLP Service.
● iQ.Service Connect: Wakes up the integrated GLP iQ.Mesh Module for 5 minutes
and enables connectivity to the GLP iQ.Service App.
● Test All: Runs a test sequence of all LEDs for a quick test of the fixture. Press BACK to
stop the test sequence.
● Test Pan/Tilt: Runs a test sequence of tilt movement only. Press BACK to stop the test
sequence.
● Test LED: Runs a test sequence of the LED pixel only. Press BACK to stop the test
sequence.
● Test Zoom: Runs a test sequence of Zoom functionality only. Press BACK to stop the
test sequence.
● Test Fans (Auto): Starts a fan self-test. Tries to detect fan errors, clears any current
errors if successful.
● Test Fans (Manual): Tests fans one by one manually.
● Test Encoders: Auto test for all encoders.
Advanced Service
The Advanced Service level is for trained technicians only. Read the user manual
carefully before entering this level.
You need to confirm by pressing and holding ENTER for 3 seconds before you can
enter this level.
This level contains the following items:
● Service Mode: Disables pan, tilt and all display timeouts to make servicing inside the
fixture head mechanics easier. This mode is automatically disabled after a power
cycle.
● Job Offset: Lets you set +/- offsets on mechanical effects. Custom offsets let you
adjust fixtures in multiple installations to compensate for the different positions of the
fixtures in the rig, for example.
Any custom offsets that you create here will not affect the fixture’s effect
calibration.
All custom offsets created here are deleted if you apply a Load Factory Defaults
command.
● Reset Counters: Resets the different resettable fixture counters.
Device counters are not deleted by a Load Factory Backup command.
Bekijk gratis de handleiding van GLP Impression X5 Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Impression X5 Compact |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13142 MB |
