GLP impression X5 Bar 1000 handleiding
Handleiding
Je bekijkt pagina 22 van 84
www.glp.de X5 Bar 1000
22 impression X5 Bar 1000 User Manual
● Pixel layout’ on page 38Error! Bookmark not defined.). Pixel 01 is at the Power and
DMX THRU connectors end of the fixture and pixel 18 is at the Power and DMX IN
connectors end of the fixture.
● y-mirror flips the pixel layout over the y-axis. Pixel 18 is at the Power and DMX THRU
connectors end of the fixture and pixel 01 is at the Power and DMX IN connectors
end of the fixture.
No signal
The No signal settings let you manage how the fixture behaves if no DMX signal is
present (if the fixture is being controlled by DMX but the DMX signal stops, or if you
apply power to the fixture when no DMX signal is present):
● Blackout sets the fixture to black out whenever it is not receiving a DMX signal. This is
the default setting.
● Hold sets the fixture to continue using the last DMX values it received.
● Scene (Stand-alone) sets the fixture to play its stored stand-alone scene (see
Capture DMX Values below) when the fixture is not receiving a DMX signal. If no
stand-alone scene is stored in memory, the fixture will black out.
If the fixture is set to Scene (Stand-alone) and if a stand-alone scene has been
stored in its memory using the Capture DMX Values command, it will display its
stand-alone scene at all times when it is powered on but not receiving a DMX
signal. You can therefore use this setting if you want fixtures to automatically start
stand-alone operation when you apply power to them.
● Capture DMX Values takes a snapshot of the DMX values that are currently being
received and stores them in the fixture’s memory as its captured scene. The fixture
will display this scene if it is set to Scene (Stand-alone) (see above) and is not
receiving a DMX signal.
Tilt invert
Increasing the tilt DMX value moves the head from its home position towards the front
of the fixture.
Changing the Tilt invert setting to ON inverts the tilt direction so that increasing the tilt
value turns the head towards the back of the fixture.
Position feedback
Tilt auto-correction (position feedback) is normally enabled (ON). Changing this
setting to OFF will disable the position feedback and auto-correction. If you need to
return tilt to its correct position, you must perform a reset.
Tilt disable
Tilt disable is normally OFF. Changing the Tilt disable setting to "Current disable" de-
activates tilt by disabling the tilt motor current.
Bekijk gratis de handleiding van GLP impression X5 Bar 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 Bar 1000 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13540 MB |
