GLP impression X4 Bar 10 handleiding
Handleiding
Je bekijkt pagina 4 van 30
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.8) from software version: v0.60 4
2 Safety Instructions
1. Before powering on the fixture, make sure that the fixtures fans and air inlets
are clean and not blocked.
2. Ensure that the fixture head can rotate unhindered throughout its complete
range of pan and tilt movement. A safety distance of at least 0.5 m must be
maintained between the fixture and any easily inflammable material (e.g.
decoration material).
3. Attention! Don’t touch the fixture during the operation. This can cause
injuries and/or damages.
4. The fixture doesn’t contain any user serviceable parts. Opening the
fixture will void all warranties.
5. It is necessary to wait at least 15 minutes after disconnecting the mains power
before handling the fixture. Pay attention to possible hot parts of the fixture.
6. To ensure safe operation, follow also the Installation guide described in the
chapter below. Operating the IMPRESSION X4 Bar 10 without suitable safety
aids like Safety cables or clamps/hooks can increase the risk of an accident
and must be avoided.
7. Repair, maintenance, and installation work shall be done by qualified or GLP
certified staff only. You need to pay attention to the common rules of
technology that are not explicitly mentioned in this manual.
8. Use only original GLP spare parts. Any structural modification of the system
will terminate all warranty claims.
9. Please keep this instruction manual for future reference.
WARNING:
Never let optical parts come in contact with alcohol,
solvents or similar cleaners.
Never look directly into the beam of light or into one of the
LEDs. Attention: LED Class 2M can cause injuries of your eyes
even without optical instruments in front of them or within a
distance of less than 0.5m and short exposure time.
Hence: Avoid direct radiation into your eyes!
The
IMPRESSION X4 Bar 10
is a High-Tech Product. To
guarantee a smooth operation, it is necessary to respect the
following rules. The manufacturer of this device will not take
responsibility for damages through any disregard of the
information provided in this manual. Warranty claims also will be
voided in the case that the fixture housing is opened.
Bekijk gratis de handleiding van GLP impression X4 Bar 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X4 Bar 10 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4352 MB |
