GLP impression FR1 handleiding
Handleiding
Je bekijkt pagina 11 van 36
German Light Products®
Impression® FR1 User Manual 11
4. Product features
The impression FR1 from GLP® is a high-quality moving head lighting fixture with a
60 watt RGBW LED and advanced optics that give a powerful, homogenous and
sharply defined beam throughout the fixture’s 10:1 zoom range. Advanced German
design allows exceptional performance and a versatile feature set to be packed into
one of the most compact moving head lighting fixtures currently available, with GLP’s
familiar baseless format. The fixture is designed for ease of installation, with Neutrik
powerCON IN and THRU connections allowing daisy-chained power lines.
The impression FR1 is designed for permanent or temporary indoor use. It can be used
outdoors if it is protected from moisture and precautions are taken to prevent damage
from direct sunlight. It may be placed upright on a level surface or suspended from a
suitable structure as described this manual.
The impression FR1 is not suitable for household use, for use in any location where
unattended children have access to it, or for use in permanent outdoor installations.
Light source
The impression FR1 is equipped with an OSRAM Ostar RGBW LED with a rated lifetime of
up to 50 000 hours.
Removable micro-Fresnel lens
A detachable micro-Fresnel lens is fitted to the front of the fixture to give a smoother
beam. It is possible to remove this lens to obtain a harder-edged beam (see page 28).
Pan and tilt
The impression FR1 pans through 629° and tilts through 210° with coarse and fine
control channels and self-correcting position feedback.
Pan and tilt position feedback can be disabled using the control panel or the
Control/Settings DMX channel.
The direction of pan and tilt movement can be reversed by selecting Invert command
using the control panel or the Control/Settings DMX channel, and you can also swap
pan and tilt via the control panel. Inverting and swapping movement is a fast way of
obtaining symmetrical effects without reprogramming at the console.
The default settings for position feedback, inversion and swapping are OFF.
Continuous (endless) pan rotation is also available on a separate DMX channel.
Color
The impression FR1 provides both color presets and 0-100% continuous RGBW color
mixing.
You should normally set RGBW levels to 100% when you begin to use the color presets
channel, but after you have selected a color on the color preset channel you can
fine-tune it using the RGBW channels.
Bekijk gratis de handleiding van GLP impression FR1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4168 MB |
