GLP impression FR10 Bar handleiding
Handleiding
Je bekijkt pagina 12 van 72
www.glp.de
12 impression FR10 Bar User Manual Rev. 20220727-1
Pattern length and offset
FX Length and FX Offset let you set up FX pattern chases and similar synchronized
action in multiple fixtures (as opposed to running the same pattern at the same time
on multiple fixtures). The length and offset options work like this:
• FX Length sets the number of steps the fixture will play back for the current pattern.
- If you set both FX Length and FX Offset to DMX 000, the FX pattern will play back at
the same time on all fixtures. Action is identical.
- If you set FX Length to DMX 000, the fixture will play back all the steps in the FX
pattern in a loop.
- If you set FX Length to DMX 003, the fixture will only play back steps 1 to 3 in a loop.
- If you set FX Length to DMX 100, the fixture will play back all the steps in the FX
pattern and then add empty steps (black) at the end of the pattern until it reaches
step 100. It will continue this action in a loop.
• FX Offset sets the starting point of the FX pattern.
- If you set FX Offset to DMX 000 or DMX 001, the FX pattern will start at the first pixel
with the first step in the pattern.
- If you set FX Offset to DMX 011, the fixture will run 10 empty pattern steps (black)
and then play back the pattern starting at step 1 on pixel 1 of the fixture.
Example A
Settings:
- Fixture A: FX Length = 000, FX Offset = 000, Pattern 01 running CW
- Fixture B: FX Length = 000, FX Offset = 000, Pattern 01 running CW
Result:
- Pattern 1 (single pixel chaser with 10 pattern steps) will run at the same time on
both fixtures from pixel 01 to pixel 10. Action will be identical.
Example B
Settings:
- Fixture A: FX Length = 020, FX offset = 000, Pattern 01 running CW
- Fixture B: FX Length = 020, FX offset = 011, Pattern 01 running CW
Result:
- Fixture A will run Pattern 1 (single pixel chaser with 10 pattern steps) on Pixel 01 to 10
followed by 10 invisible pattern steps.
- Fixture B will run 10 invisible pattern steps and then run Pattern 1 (single pixel chaser
with 10 pattern steps).
- The result is a clean pixel chaser running across two fixtures.
Bekijk gratis de handleiding van GLP impression FR10 Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR10 Bar |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 11911 MB |
