GLP impression FR10 Bar handleiding
Handleiding
Je bekijkt pagina 11 van 72
German Light Products®
impression FR10 Bar User Manual Rev. 20220727-1 11
• The two Sub modules, controlled by later sections of the DMX Channel Index, are
layers that can be used in combination with the Main module.
By default, the fixture manages color mixing on the different layers using HTP (highest
value takes priority). This means that the color mixing values of Layer 1, Layer 2 and
Layer 3 are merged together and the highest value ‘wins’.
This behavior can be changed by using the Color Mix Priority setting available on the
Control/Settings DMX channel or using the fixture’s control panel. Three options are
available:
• HTP (the default setting).
• True Color L3-L2-L1 – Layer 3 has priority over Layer 2 and Layer 2 has priority over
Layer 1.
• True Color L1-L2-L3 – Layer 1 has priority over Layer 2 and Layer 2 has priority over
Layer 3.
See ‘Color mixing priority’ on page 20 for more details.
Each layer also has its own Dimmer and Shutter channel which lets you set that layer to
Open and Blackout as well as selecting different pulse and strobe effects to run on
that layer.
Pattern control
The FR10 Bar offers a range of different FX patterns that consist of pixel color/intensity
and pixel zoom angle effects. Each pattern comprises a sequence of steps which can
be selected step by step (static) or run continuously (dynamic) forwards or backwards.
Pattern control is similar to rotating gobo control using two DMX channels on an effect
spotlight:
• Use the Pattern Select channel to select the FX pattern that you want to use, just as
you would select a gobo.
• Then use the Pattern Position/Movement channel to either:
- select a static pattern step (DMX 000 to 127 / Step 1 to 20), just as you would select
a gobo indexing angle, or
- select the speed and direction of a continuously running dynamic pattern (DMX
128 to 255), just as you would select gobo movement speed and direction.
The Pattern Position DMX range 000 to 127 is split into 20 pattern steps which you can
select one by one. If a pattern only has 10 steps, you can only select steps 0 to 10 – all
other steps are empty.
A pattern has active and inactive cells. An active cell displays the color and zoom of
the pattern. An inactive cell is transparent and will display the color and zoom angle of
the background.
You can select from 50 patterns on the Pattern Select channel. At the end of the
channel there is also a Random Pattern function and a Random Pixel FX function.
Random Pattern auto-selects patterns randomly and runs 10 pattern step cycles of
each pattern. After 10 pattern step cycles, the fixture changes to the next pattern.
Random Pixel FX randomly selects pixels which crossfade to each other.
Bekijk gratis de handleiding van GLP impression FR10 Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR10 Bar |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 11911 MB |
