GLP GT-1 handleiding
Handleiding
Je bekijkt pagina 21 van 40
German Light Products
®
GT-1 User Manual 21
6. Control panel
The LCD display provides access to user settings, readouts,
lamp control, and utilities.
From left to right, the top line of the main menu displays:
• main CPU software version
• pan, tilt, and zoom modes: N(ormal) or I(inverse)
• DMX mode
• dimming mode: L(inear) or E(xtra Soft)
In the example shown in Figure, the fixture is running software version .71; with normal
pan, inverted tilt, and normal zoom; Normal 23 channel DMX mode; and linear dimming.
When booting up, the panel displays two screens of fixture information including
component firmware and hardware versions and fixture and lamp hours before
displaying the PCB reset status screen.
Following the label for each effect motor, the reset status screen displays either “---“
(standby), “run”, “ok”, or “err” while the reset is in progress. When completed, the panel
displays the main menu. A flashing display indicates loss of DMX.
Turn the control dial to scroll menu options. Press the Enter button to select a setting,
issue a command, or enter a submenu. Press the Mode button to escape and return to
the top of the menu.
DMX control is disabled when the menu is active.
Figure 12: Example of boot sequence and reset displays
Figure 11. Menu display
Bekijk gratis de handleiding van GLP GT-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | GT-1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9532 MB |
