GLP GT-1 handleiding
Handleiding
Je bekijkt pagina 20 van 40
www.glp.de
20
GT-1 User Manual
5. Connections
Power
The GT-1 provides a 3-conductor, 20 A Neutrik powerCON socket for connection to AC
power. The autosensing power supply accepts 100-240 V, 50/60 Hz AC power. Do not
connect the fixture to any other voltage or an external dimmer.
To prevent arcing at the power connection, turn the power switch off before
connecting or disconnecting a live power cable. Check that the head is unlocked
before turning the fixture on.
The main fuse is located in a fuseholder in the base.
WARNING! Disconnect the fixture from the mains supply before replacing the fuse.
Replace only with fuse of the specified type.
Control Data
The GT-1 provides both 3-pin and 5-pin XLR input/output sockets for connection to a
USITT DMX-512 Standard data link. Use only one input and one output socket. The pin
connections are Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+]. Pins 4 & 5 on the 5-pin sockets
have no contact. Both DMX inputs are connected to both DMX outputs.
The fixture is ACN ready and provides a Neutrik RJ-45 socket for connection to an Art-
Net II-compatible Ethernet network.
Starting and stopping operation
To start or stop operation, move the power switch to the “I” (on) or “O” (off) position.
Figure 10. Connections
Bekijk gratis de handleiding van GLP GT-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | GT-1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9532 MB |
