GLP FUSION X-PAR 8Z handleiding
Handleiding
Je bekijkt pagina 13 van 51
German Light Products Settings
Rev. 20240416-01 13
Zoom
The Zoom operation can be inverted using the Fixture Settings Æ Zoom Invert menu
option.
Behavior when the fixture is not receiving a DMX signal
You can set the fixture to react in three different ways if no DMX signal is present (if the
fixture is being controlled by DMX but the DMX signal stops, or if you apply power to the
fixture when no DMX signal is present).
The behavior is set using the Fixture Settings Æ No Signal menu option.
● Hold sets the fixture to continue obeying the last DMX values it received. If the fixture
is powered up with no DMX signal, the fixture will remain in black out. This is the
default setting.
● Blackout sets the fixture to black out.
● Scene sets the fixture to output the DMX state stored using the Fixture Settings Æ
Capture Scene option on the user menu, or using the Manual DMX settings.
Variable PWM frequency
The fixture’s LED is controlled using Pulse-Width Modulation (PWM) which can cause
visible banding or strobing on video camera pictures. To minimize this effect you can
change the frequency of the pulses used for the PWM using the Fixture Settings Æ
PWM option on the user menu. As the frequency is increased, the dimming resolution
of the fixture may decrease.
OLED Display
The illuminated OLED display lets you change fixture settings when power is applied.
See Chapter 4 for more details.
Using th
e Fixture Settings Æ Display Mode option on the user menu you can set the
display to automatically switch off when no buttons are pressed for a time.
● Auto (default): the display automatically switches off after a few seconds if the fixture
is receiving a valid control signal and has not detected an error. If the fixture is not
receiving a valid control signal, the display will flash. If the fixture has detected an
error, the display remains constantly on and shows an error message.
● On: The display stays on constantly. This setting can be useful if you are configuring
or servicing the fixture.
Bekijk gratis de handleiding van GLP FUSION X-PAR 8Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION X-PAR 8Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5023 MB |
