GLP DoP Converter DINrail handleiding
Handleiding
Je bekijkt pagina 6 van 32
www.glp.de DoP Converter DINrail / UM
6 GLP DoP Converter User Manual Rev. 20220320-01
• Disconnect the DoP Converter from power immediately if the DoP Converter or any
component appears to be damaged, defective, deformed or showing signs of
overheating. Do not reapply power until the item has been repaired and judged to
be safe by a technician authorized by GLP.
• Check that all power distribution equipment, cables and connectors are in perfect
condition, rated for the electrical requirements of all connected devices, suitable
for their application and suitable for the installation environment.
• Do not connect devices to power in a chain if the total maximum current draw of all
the devices in the chain when added together will exceed the current rating of any
cable or connector used at any point in the chain.
• The voltage and frequency at the DoP Converter’s mains power output terminals
are the same as the voltage and frequency applied to the mains power input
terminals. Only connect devices to the mains power output terminals that accept
this voltage and frequency.
• The DoP Converter does not have a user-replaceable fuse. If you suspect that a fuse
has blown, disconnect the Converter from power and send it to a technician
authorized by GLP for repair.
• Check the user documentation of all the devices that you connect to the DoP
Converter and follow all the safety precautions and instructions provided by the
device manufacturers.
Fire safety and protection from burns
• Do not operate the DoP Converter if the ambient temperature (Ta) exceeds 45° C
(115° F).
• Do not install the DoP Converter in direct sunlight.
• Keep flammable materials such as volatile liquids well away from the DoP
Converter.
• Install the DoP Converter in a ventilated area only.
Installation safety and protection from personal injury
• Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.
• The safety of the installation is the responsibility of the installer.
• Install the DoP Converter only as directed in this manual.
Bekijk gratis de handleiding van GLP DoP Converter DINrail, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | DoP Converter DINrail |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3150 MB |