GLP DoP Converter DINrail handleiding
Handleiding
Je bekijkt pagina 5 van 32
German Light Products® DoP Converter DINrail / UM
GLP DoP Converter User Manual Rev. 20220320-01 5
software updates do not always affect the way you use the elements in the system.
However, it is possible that this manual does not match the system perfectly.
Software release notes can help clarify this question. You can consult software
release notes and download the correct version of this manual on the GLP website if
necessary.
• Make all user documentation available to all installers and operators. Save this user
manual for future reference.
• If you have any questions about the safe operation of the DoP Converter, please
contact an authorized GLP distributor (see list of distributors at www.glp.de).
• Use the DoP Converter only as directed in this manual. Observe all markings in this
manual and on the products.
• Refer all repairs and any service operation not described in this manual to a
technician authorized by GLP.
• Read and follow the user documentation for all additional equipment.
Electrical safety
• The DoP Converter has screw terminals that are live when power is applied to the
DoP Converter and that can present a danger of lethal electric shock. Make sure
that it is impossible for people to come into contact with live parts while power is
applied to the DoP Converter by blocking access to the DoP Converter or locating
the DoP Converter out of reach. Put up notices warning of the danger of electric
shock.
• As soon as you apply power to the DoP Converter DINrail model’s mains power IN
terminals, the mains power OUT (thru) terminals become live. If you are not using the
power OUT terminals, install a connector on the terminals to make accidental
contact with them impossible. Install the DoP Converter DINrail version
inside a closed electric power cabinet that is marked with a highly visible
electric shock hazard warning sign similar to the one shown on the right.
• Before using the DoP Converter’s mains power OUT terminals to relay power to
lighting fixtures (or other devices) in a daisy chain, add together the current draw of
all the fixtures in the chain and do not allow the total current draw to exceed 16 A
maximum.
• Support the weight of all cable runs so that they do not pull on the connections to
screw terminals.
• Use the DoP Converter in dry locations only. Do not allow the product to become
immersed. Do not expose the product to water or moisture.
• Use only a source of AC mains power that complies with local building and
electrical codes and has both overload and ground fault (earth fault) protection.
• Disconnect the installation from AC mains power before carrying out any installation
or service work and when the installation is not in use.
Bekijk gratis de handleiding van GLP DoP Converter DINrail, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | DoP Converter DINrail |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3150 MB |