GLP DoP Converter DINrail handleiding
Handleiding
Je bekijkt pagina 23 van 32
German Light Products® DoP Converter DINrail / UM
GLP DoP Converter User Manual Rev. 20220320-01 23
2. A DoP Converter RX024 version that is set up with RX start address 101 will retrieve
the data on DMX Channels 101 to 124 from the DoP power line and send that data
out as DMX channels 101 to 124 at its DMX output.
The display will show RX024/101, indicating:
- Receiver mode
- 24-channel version
- starting demodulation from DMX channel 101.
It is possible to move the range of demodulated DMX channels that are available in
the Converter RX024 and RX128 versions to anywhere within the entire range of 512
possible channels in one DMX universe.
Changing the Converter’s RX start address requires an RDM-compatible controller. The
default RX start address is 001. To change the RX start address:
To change the RX start address:
1. Connect the DoP Converter to an RDM-compatible controller.
2. Use the RDM scan function of the RDM controller to discover the DoP Converter.
TIP: Sending an Identify command makes the DOP Converter’s display flash for easy
identification when using multiple Converters in an installation.
3. Enter the required RX address value in the RX Address field in the Converter’s
information page at the RDM controller.
Locking and unlocking the control panel
You can protect the DoP Converter from tampering by applying the control panel
lock:
• To apply the lock, use a medium press (press and hold for 3 to 6 seconds) on control
button A. The display will show a locked padlock icon.
• To disable the lock and re-activate the Converter, use another medium press (press
and hold for 3 to 6 seconds) on control button A. The display will show an unlocked
padlock icon.
You can change the Converter’s settings via RDM even if the control panel lock is
applied.
Display modes
You can toggle between different display modes using control button B:
Use a medium press (press and hold for 3 to 6 seconds) on button B to toggle between
Display On (display shows a sun icon) and Display Auto (Display shows a sun icon with
an A):
• Display On keeps the display constantly on.
• Display Auto sets the display to sleep after 30 seconds. To re-activate the display,
press any button briefly (this works even if the control panel lock is enabled).
Bekijk gratis de handleiding van GLP DoP Converter DINrail, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | DoP Converter DINrail |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3150 MB |