GLP Creos handleiding

Verlichting

GLP

37 pagina's

PDF beschikbaar

Handleiding

German Light Products®      
  Rev. 20241003-03  9 
Position feedback can also be set to constantly disabled using the Fixture Settings 
options. See ’Position feedback’ on page 27. 
Fixture performance and speed options 
You can adjust the speed (and noise level) of tilt and zoom movement by selecting from 
three different performance options (see ‘Performance modes’ on page 26). 
Zoom 
The Fusion Creos has motorized zoom control that lets you vary the beam angle from 
spot to flood as the DMX value increases. 
You can adjust the speed (and noise level) of zoom movement, as well as the speed of all 
other mechanical effects, by selecting from three different performance options (see 
‘Performance modes’ on page 26). 
Main and Sub modules (Main and Sub fixtures) 
Some control modes divide the fixture into two or more modules (Main module and Sub 
modules). For example, Control Modes 2-4 divide the fixture into: 
●  Main module (Layer 1 = one RGB(L) Wash fixture)  
●  Sub module (Layer 2 = pattern engine with segment or individual pixel control). 
The Sub module has its own intensity and shutter channels. Professional controllers will 
handle this setup in a smart multi-fixture profile. 
The Sub fixture mode setting lets you decide whether the Sub module should be 
subordinate to or independent of the Main module (see ‘Sub module mode / Sub fixture 
mode’ on page 25). There are two possible settings: 
Normal: all Sub Fixture Channels (Sub Modules) are subordinate to the Main Fixture 
channels. This means that the intensity and shutter of the Main Module act as Master 
intensity and Master shutter for the Sub Modules. 
Independent: the Sub Modules can be controlled independently of the Main Module 
and are not affected by the intensity and shutter of the main module. 
Individual segment or pixel control 
The Fusion Creos provides eighteen individually controllable pixels. Each pixel cell 
houses a 40 W RGBL LED that can be controlled individually in intensity and color to 
create dynamic effects and pixel mapping.  
The fixture’s different DMX control modes offer different options for working with the 
individual segments or pixels. 
In nearly all DMX modes, the Main module gives color mixing control of all eighteen 
pixels together as one segment.  
●  Mode 1 (Basic) provides a Main module with color mixing control of all pixels 
together as one segment. 
●  Mode 2 (Normal) adds a Sub module as a second layer with pattern effects and color 
mixing of all pixels as one segment.  

Bekijk gratis de handleiding van GLP Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.