GLP Creos handleiding
Handleiding
Je bekijkt pagina 8 van 37
www.glp.de
8 Fusion Creos User Manual
3. Features
The FUSION Creos is an LED washlight with 18 x 40W RGBL LEDs arranged in three rows
of 6 pixels each. The motorized 1:12 zoom provides a very powerful beam of 4.3° with up
to 673 kcd and a total output of up to 7,600 lm. The motorized head allows 190° tilt. A
particular highlight of the FUSION Creos is its clusterable design, which ensures a
uniform and homogeneous pixel pitch across multiple devices.
The three LED rows can be seamlessly extended by linking several devices together.
This in turn allows the construction of huge LED bars and correspondingly impressive
light curtains.
The IP65-certified housing enables unlimited indoor and temporary outdoor use.
FUSION CREOS is protected against wind and rain, but also against dust, dirt, fog fluid
residue and confetti particles.
In addition to PowerCon True 1 In/Out and DMX 5pin In/Out, two fail-safe EtherNet ports,
a LumenRadio CRMX module and the tried-and-tested GLP iQ.Mesh system are already
integrated for particularly flexible use. At less than 20 kg, the fixture is compact and
fitted for everyday use.
Control options
The Fusion Creos is compatible with DMX 512, RDM, Art-Net and sACN control protocols.
The fixture also features GLP iQ.Mesh and a LumenRadio CRMX module supplied
installed in the fixture as standard. The GLP iQ.Mesh Module allows easy configuration,
control, service and maintenance via the GLP iQ.Service App. Other FPO modules can
be supplied on request – GLP Service can give details.
Powering on
When power is applied to the fixture and no valid DMX signal is present, the head
moves automatically to its home position (tilt center).
Tilt
The Fusion Creos has motorized tilt movement with coarse and fine control channels.
Direction of tilt movement
With the fixture standing on the ground, increasing the tilt DMX value moves the
head towards the front from its home position. Tilt direction can be reversed using
the Fixture Settings → Tilt Invert setting (see ‘Tilt invert’ on page 27) or via DMX on
the Special/Control channel. This can be useful when setting up symmetrical
movement in multiple fixtures.
Tilt position feedback and self-correction
The fixture has a tilt position feedback and self-correction system that brings the
head back to its correct position if it was unintentionally moved. When correcting
tilt, the fixture at first tries twice to move to the correct position. If it cannot move to
this position, it waits for a short period and then tries again. Position feedback is
automatically disabled for a short time if you press one of the control panel buttons.
This feature lets an operator move the head manually. Tilt remains disabled while
you are using the fixture’s control panel.
Bekijk gratis de handleiding van GLP Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5002 MB |
