GLP Creos handleiding
Handleiding
Je bekijkt pagina 14 van 37
www.glp.de
14 Fusion Creos User Manual
● Strobe pixel random (only available when the fixture is set to a DMX mode with
individual pixel control) strobes individual pixels at random to give a kind of sparkling
effect. Speed can be adjusted from slow to fast.
● Strobe random strobes all of one fixture’s pixels together at random intervals,
allowing a random strobe between multiple fixtures. Speed can be adjusted from
slow to fast. Note that the random effect across multiple fixtures really is random!
● Strobe strobes all of one fixture’s pixels together and also perfectly synchronizes the
strobe in multiple fixtures so that all the fixtures flash at exactly the same time.
Speed can be adjusted from slow to fast.
Note: Depending on the selected Sub Module Mode, the dimmer and shutter channels
of the Sub modules can operate independently of or subordinately to the dimmer and
shutter channels of the Main module.
Dimmer
The electronic dimming effect provides smooth 16-bit dimming of the Main module and
Sub module. Three dimming curves with different dimming characteristics are available.
See ‘Dimming curves’ on page 24.
Pattern control
The Fusion Creos offers a wide range of static and dynamic pre-programmed FX
patterns on the Sub modules. The Sub module color control channels define the color of
the pattern effects.
A static pattern is a fixed pattern with only one pattern step. This allows you a very quick
selection of a non-dynamic effect. It has active and inactive pixels. Each active pixel
shows the selected pattern color while each inactive pixel is fully transparent.
A dynamic pattern is a sequence of multiple pattern steps and has active and inactive
pixels. Each active pixel shows the selected pattern color while each inactive pixel is fully
transparent. You can set pattern steps to automatically change continuously (Pattern
Speed) or you can directly select pattern steps (Pattern Index).
Note: The Mix Priority channel lets you decide how the output of the Main module and
the Sub module (pattern or pixel mapping) should be merged.
Pattern selection
The pattern selection channel offers a choice of 59 static patterns, 50 dynamic patterns
and 11 special patterns. The dynamic patterns offer multiple pattern steps for individual
step selection or continuous pattern step chasers.
Pattern 0 (DMX 000) is the idle pattern and just sets all pixels to active.
The Random Pixel FX pattern at the end of the Pattern Select channel randomly selects
pixels to create an attractive sparkle effect.
Pattern speed/index
As a dynamic pattern is a sequence of multiple pattern steps, you can select either:
● an automatic clockwise or counterclockwise continuous run-through of the pattern
steps with different speeds (dynamic speed control = DMX values 002 … 127), or
● one of the available specific pattern steps (static indexing = DMX values 128 … 255).
Bekijk gratis de handleiding van GLP Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5002 MB |
