GLP Creos handleiding
Handleiding
Je bekijkt pagina 12 van 37
www.glp.de
12 Fusion Creos User Manual
Note: To obtain the desired color temperature on the CTC channel, you must set all
Color Mix channels to 100%. If they are not at 100%, the system will mix color relative to
the selected white point of the CTC channel.
The CTC channel affects all the fixture’s modules. Setting the CTC channel to a specific
color temperature will affect the open white of the Main module and Sub modules.
Color Quality Control (CQC)
The CQC channel lets you modify the spectral mix of the white output in order to
achieve a balance between better color rendering or higher output intensity. The
following options are available:
● High Quality (HQ) deploys multiple LEDs to create a richer light spectrum that gives
improved color rendering but also slightly lower output. Color is mixed with priority
given to the best white color rendering quality. Saturated colors will have maximum
saturation at DMX 000 and will smoothly become unsaturated until they reach 0%
saturation (= white) at DMX value 127.
● High Output (HO) gives higher output intensity but reduced color rendering
performance. Color is mixed with priority given to the highest output in white.
Saturated colors will have maximum saturation at DMX 255 and will smoothly
become unsaturated until they reach 0% saturation (= white) at DMX value 128.
While using white light, the CQC channel lets you change between white with priority
on high-quality color rendering and white with priority on highest output. Additionally,
the CQC channel lets you smoothly desaturate colors. If you have set a saturated color in
the color mix, the CQC channel lets you smoothly desaturate the color from saturated to
fully unsaturated (i.e. white).
Note: The CQC channel affects all the fixture’s modules. Setting the CQC channel to a
specific value will affect the colors of the Main module and Sub modules.
Note: In RGBL color mix mode the HO and HQ CQC options set set smooth (HQ) or
aggressive (HO) dimmer curves.
Magenta/Green Shift (M/G Shift)
The Magenta/Green Shift channel lets you move the color coordinate of a white point, a
mixed color or a selected CTC color along a vertical line on the color temperature curve
in all three Color Mix modes. The corresponding white point is either shifted towards
Green or Magenta.
If M/G Shift is enabled, it immediately affects all mixed colors as well as the color
temperature that is selected on the CTC channel. It has no effect on the colors of the
virtual color wheel.
Note: The M/G Shift channel affects the entire fixture. Setting the M/G Shift channel to a
specific value will affect the output of the Main module and Sub modules.
Color wheel
The Fusion Creos features a virtual color wheel channel that gives quick access to a wide
range of LEE-referenced colors in all three Color Mix modes. Color wheel color presets
are always mixed with the best available spectrum. Color filter color coordinates are
based on a Source C (daylight) light source.
Bekijk gratis de handleiding van GLP Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5002 MB |
