GLP ArenaLED1 Touring handleiding
Handleiding
Je bekijkt pagina 22 van 33
www.glp.de GLP ArenaLED1 Touring
22 GLP ArenaLED1 Touring Safety and User Manual
To trigger a complete reset (reboot) of the fixture using the Control/Settings
channel, the DMX value for this function needs to be held for 3 seconds.
If you want to trigger an additional reset using the Control/Settings channel, you
must first leave the Reset DMX value and then send this value again. This
requirement avoids continuous reboots if the fixture is patched wrongly.
NB: In firmware v. 0.5.0 not all Control/Settings channel commands are fully
implemented.
CTC (Color Temperature Control)
Available in Color fixtures only.
The CTC (Color Temperature Correction) channel lets you temporarily change the
fixture’s defined white point. Color temperatures from 10 000 K to 2 500 K are
available.
• In RGB color mixing mode, the color mix needs to be set to all 100% for pure
white light (RGB: R255/G255/B255).
• In RGBL color mixing mode, the color mix needs to be set to all 100% (RGBL:
R255/G255/B255/L255).
If a color temperature is selected using the CTC channel, it is still possible to mix
colors. The system will then mix colors relative to the selected new white point of
the CTC channel.
RGB / RGBL color values differ from values mixed by open white.
NB: In firmware v.0.5.0 the CTC channel is fully functional in DMX Mode 1. In
DMX Mode 2 bugs are to be expected. During RGBL use the CTC channel is
disabled
Tungsten (Tungsten Simulation Channel)
Available in Color fixtures only
Tungsten lamps have a delay when dimming level is changed and a color shift
along the black body line when light intensity is decreased. The tungsten
simulation channel gives tungsten lamp behavior options in all color mixing modes.
In the first part of the channel the user can choose between different standard
tungsten features with fixed color temperature, red shift and dimming delay for the
main fixture’s color mixing. Color temperature, color shift and inertia of the selected
light source are fully simulated. Tungsten modes have higher priority than the color
wheel or CTC.
In the second part of the channel, one of the corresponding tungsten effects (color
shift and inertia) can be superimposed onto the currently set color mix color or the
color temperature that has been selected on the CTC channel.
NB: In firmware v.0.5.0 the Tungsten channel is available but bugs are to be
expected. During RGBL use the Tungsten channel is disabled.
Bekijk gratis de handleiding van GLP ArenaLED1 Touring, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | ArenaLED1 Touring |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1825 MB |
