GLP ArenaLED1 Touring handleiding
Handleiding
Je bekijkt pagina 16 van 33
www.glp.de GLP ArenaLED1 Touring
16 GLP ArenaLED1 Touring Safety and User Manual
5. Connections
Warning! Read ‘Safety’ starting on page 4 before connecting the fixture
to power.
AC mains power
The ArenaLED1 TOURING has a TRUE1 TOP-compatible socket for connection to AC
mains power from a TRUE1-TOP compatible female cable connector. The auto-
sensing power supply accepts 100-240 V, 50/60 Hz AC power. Do not connect the
fixture to AC power at any other voltage.
The AC mains power distribution circuit must include a connection to ground /
protective earth. It must be protected against ground / earth leakage and overload.
Do not connect the fixture to a power distribution circuit that is equipped with an
external dimmer.
The fixture includes a Power THRU connector which allows you to daisy-chain
multiple fixtures. See ‘Connecting multiple fixtures to power in a chain’ on page 17.
Remove the rubber seals from sockets before inserting cable connectors. Reinstall
the seal if you remove a cable connector from a socket. Keep rubber seals installed
on all unused sockets at all times.
Powering the fixture on
The fixture does not have an ON/OFF switch. It is powered on as soon as power is
applied to the power input cable. Before applying power, check that nobody will be
looking directly at the fixture if it lights up suddenly.
Connecting to power
Although TRUE1 connectors support hot-plugging, it is still good practice to shut
down power to power cables before connecting them to fixtures.
To connect the fixture to power:
Remove the rubber sealing cap from the MAINS IN socket (C in ‘Fixture overview’
on page 13) on the back of the fixture.
Check that the TRUE1 TOP-compatible connector on the power input cable is in
perfect condition, paying attention to the keys on the connector. If the
connector or its keys show signs of damage, replace the connector with a new
item.
Line up the keys in the cable connector correctly with the keyways in the MAINS
IN socket on the fixture.
Insert the connector into the socket. Do not use force. If you feel any more than
light resistance when you try to push the connector into the socket, something
is wrong. You may have lined up keys and keyways incorrectly. Remove the
connector and check the positions of keys and keyways before trying to insert
the connector again.
Bekijk gratis de handleiding van GLP ArenaLED1 Touring, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | ArenaLED1 Touring |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1825 MB |
